D02400 - SEMI D24 - Specification for Glass Substrates Used to Manufacture Flat Panel Displays
This Standard was technically approved by the Flat Panel Display – Factory Automation Global Technical Committee. This edition was approved for publication by the global Audits and Reviews Subcommittee on May 16, 2006. Available at www.semiviews.org and www.semi.org in July 2006; originally published February 2000.
NOTICE: This Standard or Safety Guideline has an Inactive Status because the conditions to maintain Current Status have not been met. Inactive Standards or Safety Guidelines are available from SEMI and continue to be valid for use.
This Standard specifies selected geometrical requirements of glass substrates used to manufacture flat panel displays.
This Standard is intended to set levels of specification for glass substrates to insure repeatable manufacture of flat panel displays and uniformity of substrates from all vendors. This Standard will also insure interchangeability at all mechanical interfaces within process tools as well as with transportation and automation cassettes.
Referenced SEMI Standards
SEMI D3 — Quality Area Specification for Flat Panel Display Substrates
SEMI D4 — Method for Referencing Flat Panel Display Substrates
SEMI D5 — Standard Size for Flat Panel Display Substrates
SEMI D6 — Specification for Liquid Crystal Display (LCD) Mask Substrates
SEMI D7 — FPD Glass Substrate Surface Roughness Measurement Method
SEMI D9 — Terminology for FPD Substrates
SEMI D12 — Specification for Edge Condition of Flat Panel Display (FPD) Substrates
SEMI D15 — FPD Glass Substrate Surface Waviness Measurement Method
|Interested in purchasing additional SEMI Standards? Consider SEMIViews, an online portal with access to over 1000 Standards.|
Refund Policy: Due to the nature of our products, SEMI has a no refund/no exchange policy. Please make sure that you have reviewed your order prior to finalizing your purchase. All sales are final.