SEMI F10 - Test Method to Determine the Internal Pressure Required to Produce a Failure of a Tube Fitting Connection Made of Fluorocarbon Materials
NOTICE: This Standard or Safety Guideline has an Inactive Status because the conditions to maintain Current Status have not been met. Inactive Standards or Safety Guidelines are available from SEMI and continue to be valid for use.
This method provides a uniform procedure to determine the internal pressure required to produce failure of fitting connections made of fluorocarbon materials.
This method can be used to characterize tube fitting connections on the basis of test data developed under the conditions described herein, but the results are not intended to imply a performance rating.
Tube defined in this method has a circular cross section and is made of fluorocarbon materials.
Tube fittings defined in this method are made of fluorocarbon materials for all parts in contact with the internal fluid.
• Parts such as a nut or gripper are not limited to being made of a fluorocarbon material.
Only the seal between the tube and tube fitting being evaluated is within the scope of this document. All other threaded seals are beyond the scope of this document.
When using this method for making comparisons among various tube fittings and/or manufacturers, the user must be specific in the selection of the tube and tube fittings to be evaluated.
The International System of Units (SI) is used as the standard unit of measure in this document. The U.S. Customary units are in parentheses for reference purposes only and may have been rounded to the nearest whole value.
Referenced SEMI Standards
|Interested in purchasing additional SEMI Standards? Consider SEMIViews, an online portal with access to over 1000 Standards.|